 |
|
| MicroPulser Typical Installations | |
|
See Also... |
 |
 MicroPulser 1000 installed under a mechanical volume readout on a gas flow meter. (click image to enlarge) |
Installing a MicroPulser 1000 on a flow meter provides precision electronic flow information to flow dependant equipment such as odorant injection systems and sample rate controllers. At 1000 pulses per revolution, monitoring equipment will get continuous updates even at extremely low flow or index shaft rotation rates. An odorant injection system set to inject proportional to flow may temporarily stop injection if no flow pulses are received after a specified time. If the flow is low, and not stopped, the odorant injection rate may be inaccurate. Low resolution pulsers often confuse monitoring equipment into thinking there is a no-flow condition, when in fact, due to the slow index speed, the time between pulses is the problem. |
 MicroPulser 1000M's matched outputs provides flow information to two flow computers. (click image to enlarge) |
The MicroPulser 1000M has matched outputs to provide flow information to two devices from the same pulser; such as a flow computer and a sample rate controller, or two flow computers at a custody transfer metering station. |